Skip to content

Witte VAC-MAT

Thame Part No: N/A Categories: ,
£8.67£8.78 ex VAT

What is VAC-MAT ?

It is a thin soft polymer mat with many spaced out vacuum points, suckers in different sizes with a fine hole in each centre and a raised lip. On the underside there are six lugs which locate in the special VAC-MAT™ chuck. On the mat under surface there are grid shaped grooves which distribute the vacuum to each of the small holes. A lip right around the outside edge ensures no leakage.

What size is VAC-MAT™?

All VAC-MAT™s are 2,5 x 200 x 300 mm. The tolerance lies at +/- 0,04mm and concave up to 0,1mm. To increase the size of the working area, the modular VAC-MAT™ chucks are connected to one another and VAC-MAT™s are simply placed on.

Is VAC-MAT™ reusable?

The working life of a VAC-MAT™ depends on the number and size of cuts made into the mat during machining.

Operating temperature for VAC-MAT™?

VAC-MAT™, available in RED, BLUE and GREEN versions can be used at 40°C without any limitations

Downloads

Vac Mat

Full Witte Catalogue

Why WITTE VAC-MAT™ is the right choice for you.

Application

Wide spectrum of different workpiece forms can be clamped

  • Milling
  • Drilling
  • Grinding
  • Five sided treatment including milling into the VAC-MAT™

Advantages

  • Strong hold down force
  • Clamping surface with a high friction value
  • Milling through of outer and inner contours
  • Precise and exact cut outs due to the fact that the workpiece can be milled through into the VAC-MAT™ leaving a clean cut edge

Handling

  • Set up time reduced to seconds as fitting of single rubber seals become obsolete
  • Surface friendly material which avoids scratching of workpiece surface area
  • No extra clamping fixture needed

Additional information

Weight 0.14 kg
Type

Blue (Standard), Black (Blanking mat), Green (Hard), Red (Single Use), Heat Resistant