FLAIG PMNEO
PMNEO Type Permanent Magnetic Chucks
PMNEO Type Permanent Magnetic Chucks are super strong, compact plates for heavy machining. Parts from approximately 30x15x6 mm can be clamped with maximum achievable holding forces. Even on rough surfaces, good holding forces are still achieved. Optionally, tooling bars can be mounted on the PMNEO, allowing the workpiece to be raised for full accessibility. This design facilitates drilling holes on the magnetic clamping plate while providing more space for chips to accumulate around the component, ensuring that even long-running HSC milled parts do not sink into the resulting chips.
| Model | Product Number | Nominal Holding Force (N/cm²) | Pole Pitch (mm) | Dimension Length (mm) | Dimension Width (mm) | Dimension Height (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| PMNEO 2424 | 2007 2424-01 | 150 | Querpol 11 + 4 | 240 | 240 | 48 | 21 |
| PMNEO 2515 | 2007 2515-01 | 150 | Querpol 11 + 4 | 250 | 150 | 56 | 17 |
| PMNEO 2828 | 2007 2828-01 | 150 | Querpol 11 + 4 | 280 | 280 | 48 | 28 |
| PMNEO 3015 | 2007 3015-01 | 150 | Querpol 11 + 4 | 300 | 150 | 56 | 18 |
| PMNEO 3020 | 2007 3020-01 | 150 | Querpol 11 + 4 | 300 | 200 | 56 | 26 |
| PMNEO 3232 | 2007 3233-01 | 150 | Querpol 11 + 4 | 320 | 320 | 48 | 35 |
| PMNEO 3515 | 2007 3515-01 | 150 | Querpol 11 + 4 | 350 | 150 | 56 | 24 |
| PMNEO 4020 | 2007 4020-01 | 150 | Querpol 11 + 4 | 400 | 200 | 56 | 35 |
| PMNEO 4025 | 2007 4025-01 | 150 | Querpol 11 + 4 | 400 | 250 | 56 | 38 |
| PMNEO 4515 | 2007 4515-01 | 150 | Querpol 11 + 4 | 450 | 150 | 56 | 31 |
| PMNEO 5020 | 2007 5020-01 | 150 | Querpol 11 + 4 | 500 | 200 | 56 | 44 |
| PMNEO 5025 | 2007 5025-01 | 150 | Querpol 11 + 4 | 500 | 250 | 56 | 65 |
| PMNEO 5030 | 2007 5030-01 | 150 | Querpol 11 + 4 | 500 | 300 | 56 | 56 |
| PMNEO 6020 | 2007 6020-01 | 150 | Querpol 11 + 4 | 600 | 200 | 56 | 52 |
| PMNEO 6025 | 2007 6025-01 | 150 | Querpol 11 + 4 | 600 | 250 | 56 | 64 |
| PMNEO 6030 | 2007 6030-01 | 150 | Querpol 11 + 4 | 600 | 300 | 56 | 78 |
