Additional information
| Weight | 0.14 kg |
|---|---|
| Type | Blue (Standard), Black (Blanking mat), Green (Hard), Red (Single Use), Heat Resistant |
Witte VAC-MAT – Vacuum Mats
Polymer mat for use with Witte VAC-MAT or THAME modular chuck system
Price range: £8.67 through £8.78 ex VATShare:
What is a VAC-MAT vacuum mat?
It is a thin, soft polymer mat with many spaced-out vacuum points, suckers of different sizes with a fine hole in each centre and a raised lip. On the underside, there are six lugs which locate in the special VAC-MAT™ chuck. On the mat’s surface, there are grid-shaped grooves which distribute the vacuum to each of the small holes. A lip right around the outside edge ensures no leakage.
What size is VAC-MAT™?
All VAC-MAT™s are 2,5 x 200 x 300 mm. The tolerance is ±0,04 mm and concave to 0,1mm. To increase the size of the working area, the modular VAC-MAT™ chucks are connected, and VAC-MAT™s are placed on them.
Is VAC-MAT™ reusable?
The working life of a VAC-MAT™ depends on the number and size of cuts made into the mat during machining.
Operating temperature for VAC-MAT™?
VAC-MAT™, available in RED, BLUE and GREEN versions can be used at 40°C without any limitations
Downloads
WITTE Vacuum Catalogue-2024.pdf
Why WITTE VAC-MAT™ is the right choice for you.
Application
Wide spectrum of different workpiece forms can be clamped
- Milling
- Drilling
- Grinding
- Five sided treatment including milling into the VAC-MAT™
Advantages
- Strong hold down force
- Clamping surface with a high friction value
- Milling through of outer and inner contours
- Precise and exact cut outs due to the fact that the workpiece can be milled through into the VAC-MAT™ leaving a clean cut edge
Handling
- Set up time reduced to seconds as fitting of single rubber seals become obsolete
- Surface friendly material which avoids scratching of workpiece surface area
- No extra clamping fixture needed
